0511-84413566
二維碼

臥式燃油(氣)承壓熱水鍋爐

當前位置:首頁 > 產品中心 > 臥式燃油(氣)承壓熱水鍋爐
臥式燃油(氣)承壓熱水鍋爐,臥式燃油(氣)承壓熱水鍋爐廠家鎮江金能鍋爐有限公司

臥式燃油(氣)承壓熱水鍋爐


生產廠家:鎮江金能鍋爐有限公司


詳細介紹

 

臥式燃油(氣)承壓熱水鍋爐

 
 
 

Horizontal fuel oil (gas) pressure hot water boiler

 

 

產品特點介紹 Features of the product introduction
    “蘇正”臥式燃油燃氣熱水鍋爐分中心回焰二回程和三回程全濕背結構。二回程火管式鍋爐,由波形爐膽,光管或螺紋管中心對稱布置構成受熱面。高溫煙氣由小煙室轉彎進入煙管到前煙箱再進入后煙箱經煙囪排入大氣。
    結構獨特、設計新穎,足夠的受熱面和結合一些強化傳熱手段,使鍋爐熱效率達到理想化狀態。在安全性方面集防爆門,數字化控制系統于一身,使安全有保障。
    臥式系列熱水鍋爐分常壓、承壓兩種結構,寬泛的產品種類視用戶現場而選擇,承壓熱水鍋爐對較高供熱要求的用戶適應性更強,鍋爐整機出廠(集安全閥、進出水閥、止回閥、排污閥、儀表、控制系統與一體),供貨范圍內的管路系統鄒已經連接好。鍋爐外表采用彩鋼板,底座、前后煙箱設計精美,安裝簡便快速。只需接通電源、水源、燃料管道進出水管道、排污管道等,便可投入運行。

        The fuel and gas hot water boiler branch horizontal flame back two return and three return all wet back structure. Two return fire tube boiler, furnace by the wave, or light pipe thread form heating surface tube center symmetrical arrangement. High temperature flue gas from small room before turning into the smoke pipe to smoke cigarette box after smoke into the box by the chimney discharged into the atmosphere.
        Unique structure, novel design, adequate heating surface and combined with some strengthening heat transfer method, the boiler heat efficiency to achieve ideal state. The explosion door safety set, in a digital control system, and the safeguard.
        Series of horizontal atmospheric pressure hot water boiler points, confined two kinds of structure, wide range of products depending on the user site choice, for high pressure hot water boiler heating requirements of the users more flexible, boiler machine factory (set of safety valve, in and out of the water valve, check valve, drain valve, instrument, control system and integration), within the scope of supply piping system of zou is connected well. Before and after the appearance of boiler is made of color steel plate, the base, smoke box design elegant, simple and rapid installation. Just turn on the power supply, water supply, fuel pipe in and out of the water pipes, drainage pipes, etc., can be put into operation.

 

用途介紹 The purpose
    可用于紡織、印染、造紙、食品、橡膠、化工、醫藥、鋼鐵、冶金等工業產品加工工藝過程所需高溫熱水。并可供企業、機關、賓館、學校、餐飲、服務性行業取暖、洗浴、空調與生活用所需熱水。

        Can using for the spinning, printing and dyeing, papermaking, foodstuff, rubber industry, plastic industry, chemical industry, medicine industry and some industry products which need the hot water. It can also offer the air-condition hot water and high quality sanitary hot water for the company, office, hotel, school, eatery and service trades.

 

 

技術參數 Technical information

注:*本公司不斷追求技術創新及產品改進,產品的規格、技術參數及外型如有改動恕不另行通知。

PS: Our company always improve the products, if something is change in a hurry, we can't show it in our catalogue, thanks for your understanding.

 

安裝示意圖 Installation Instruction

 

上一篇我們就臥式燃油(氣)承壓熱水鍋爐做了詳細介紹和說明, 下一篇繼續對其他產品做詳細介紹,如需了解更多我們的信息,請持續關注。
本文由臥式燃油(氣)承壓熱水鍋爐生產廠家鎮江金能鍋爐有限公司于2019/4/16 17:14:13整理發布。
轉載請注明出處:http://www.pescheriacaravello.com/swzgl/4879.html。



又色又爽又黄的视频免费网站